Entering Grade - Spectra Precision DG613 Bedienungsanleitung

Entering Grade

– changing the grade value in Step + Go or Digit Select mode.
Press and release the M (Menu) button; Grade Edit will be highlighted.
Press/release button E  The grade value will be shown.
Press/release button M  escape/return to the standard display.
Step + Go Mode:
Press and hold (+/-) buttons for changing the grade value after the comma.
Press/release 2/5 buttons  change the sign of the grade value.
Press and hold Plus (+) and Minus (-) buttons simultaneously starts Quick change
mode where the grade value in front of the comma will be set to 0% and then starts
changing in 1% increments.
Note: When the grade value for the axis reaches its highest amount, the grade value
switches to the lowest value for that axis. For example, the value switches from +40% to
-12%.
www.kreitel-vermessungsgeraete.de
The laser will self-level to the required grade position after confirming the grade change
with E (Enter) button.
Note: The bubble symbol at the laser's and remote's LCD will flash until the laser has
been self-leveled to the requested grade position.
Digit Select Mode (Default):
A cursor at the sign of the grade value is flashing.
Press and hold the EL button quick set to 0%.
Press/release Plus (+) and Minus (-) buttons  change the sign of the grade value.
Pressing and releasing right or left button moves the cursor to the right/left.
Press and release Plus (+) and Minus (-) buttons to change the selected digit.
The laser will self-level to the required grade position after confirming the grade change
with E (Enter) button.
Grade Entering can be exited any time by pressing and releasing M button.
20