Herunterladen Inhalt Inhalt Diese Seite drucken

Defrosting; Gradual Cooking; Special Functions - BOMANN MWG 2218 H CB Bedienungsanleitung

Mikrowelle mit doppelgrill
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
Display / weight
Code Function
in gram
200
A-9
Pizza
300
400
500
Poultry
750
A-10
(roasted)
1000
1200
2. Press the START/+30SEC./CONFIRM button to confirm your
settings.
3. Use the turning knob to set the desired weight.
4. Press the START/+30SEC./CONFIRM button to start operation.
After the time has elapsed the device will turn off and 5 signal tones
will sound. Take the food from the device.
Note:
► During the A-8 setting for cakes the device will pre-heat to
160°C. 2 signal tones will sound when the temperature is
reached. Open the door and place the cake inside. Press the
START/+30SEC./CONFIRM button. The baking time of 35
minutes will start running.
► Menu A-9: For best results when preparing your pizza, we
recommend that you preheat the pizza stone in G-3 mode for
around 5 minutes.

Defrosting

Using the defrost settings you may automatically defrost your food
in two different ways. Select the defrost function by weight and time.
1. Repeatedly press the W.T./TIME DEFROST button to select one
of the defrost functions:
dEF I
Defrosting by weight
dEF II Defrosting by time
2. Use the turning knob to set the desired weight/ time.
3. Press the START/+30SEC./CONFIRM button to start operation.
After the time has elapsed the device will turn off and 5 signal tones
will sound. Take the food from the device.
Note:
► Microwave power when defrosting is 30% (270W).
► If the weight of the goods is less than 200g, do not place them
on the centre, but at the edge of the metal plate.

Gradual cooking

You can set the programs in such a way that up to 3 different func-
tions can be carried out in succession.
Assume you select the following programs:
Defrost
Cook
Grill
Power setting
Microwave + Quartz grill
+ lower Heating element
(C-1)
Microwave + Quartz grill
+ lower Heating element
(C-1)
btw. 0.1 – 2.0kg
btw. 5 seconds -
95 minutes
1. Select the 1st function: Press the W.T./TIME DEFROST button
once or twice.
2. Set the weight or the required time using the knob.
3. Select the 2nd function: Press the MICROWAVE button once/
repeatedly to select the desired microwave power setting.
4. Press the START/+30SEC./CONFIRM button to confirm your
settings.
5. Use the turning knob to set the desired cooking time between
5 seconds and 95 minutes.
6. Select the 3rd function: Select the required grill mode by press-
ing the DOUBLE GRILL/COMBI button once or repeatedly.
7. Press the START/+30SEC./CONFIRM button to confirm your
settings.
8. Use the turning knob to set the desired cooking time between
5 seconds and 95 minutes.
9. Press the START/+30SEC./CONFIRM button to start operation.
Note:
► The change of program is indicated by an acoustic signal.
►When half of the grilling time has passed two acoustic signals
are heard to remind you to turn the food over.
After the time has elapsed the device will turn off and 5 signal tones
will sound. Take the food from the device.
Note:
The auto functions and the convection mode with pre-heating
may not be used for gradual cooking.

Special functions

Auto start
You may delay the start of microwave, grill, convection, auto
functions or even of a combi setting. The maximum time-delay is
23 hours and 59 minutes.
Note:
First set the clock! Otherwise you may not use this function.
When using auto start, the defrost function is not available.
Example: Proceed as follows for automatically starting the micro-
wave:
1. Press the MICROWAVE button once/repeatedly to select the
desired microwave power setting.
2. Press the START/+30SEC./CONFIRM button to confirm your
settings.
3. Use the turning knob to set the desired cooking time.
4. Press the CLOCK/PRE-SET button. A signal tone sounds and
the display will show the current time, with the first digit flashing.
5. Use the turning knob to set the hour of the desired start time.
6. Press the CLOCK/PRE-SET button. A signal tone sounds and
the minutes will be flashing on the display.
7. Use the turning knob to set the minutes of the desired start time.
8. Press the START/+30SEC./CONFIRM button to confirm. The
delimiter symbol ":"of the digital clock on the display stops
flashing.
81

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis