Introduction; Intention Of Use; Models And Accessories; Standard Machine And Accessories - Fp International Pro Pak’r Original Bedienungsanleitung

1 i
ntroduction
1.1 i
ntention of use
The machine is intended for the production of air filled cushions. The inflated air cushions can be cut
at a desired quantity, then serves as void-fill for packaging purposes.
See "Product to be processed" on page 22 for precise details of suitable kinds of film to be processed.
1.2 g
lossAry of
Pedal: A control mechanism (transport and sealing of film, starting up of presets) by
means of a foot switch.
Display: Image shown on the screen.
Control panel: Screen operated by buttons, to access control functions.
RFID: We equip every PRO PAK'R roll with an RFID tag that holds information about
the optimal sealing temperature and inflation levels.
The controls are explained under "Operating Instructions " on page 13.
1.3 m
odels And
1.3.1 s
tAndArd
The standard version consists of the assembled unit complete with:
• Machine (Inflator), including power cord.
• >500mm wide film (Optional)
• Stand (Optional)
• Pedal (Optional)
• Sensor (Optional)

pro pak'r User Manual Version 1.0
m t
Achine erms And
A
ccessories
m A
Achine And ccessories
Warning!
In case processing > 500mm wide film, use the wide film
kit.
If needed, read the instruction carefully.
Use the >500mm wide film kit for rolls;
• larger then 500mm (width).
• and heavier than 15 kg (weight).
J
Argon
page -8-
FP International