Repair And Maintenance; Replacing Blades / Cone Tip; Change Cone Tip; Replace Blade / New Cutting Edge - Fp International Pro Pak’r Original Bedienungsanleitung

3 o
perAting
3.7

repAir And mAintenAnce

Preventive maintenance.
The machine should be serviced every half year of particular importance are:
• Internal cleaning, external cleaning, visual check of wear parts.
Repairs may only be carried out by qualified service personnel of FP International. The
following parts can be carried out by maintenance personnel of the costumers:
Replacing blade, replacing cone tip, replacing wear strips, cleaning / replacing backing wheel.
3.7.1 r
eplAcing
3.7.1.1 Change Cone Tip. (See page 14)
Pull the cone off the blow pipe and replace a new cone tip.
3.7.1.2 Replace blade or new cutting edge. (Be carefull, blade is
sharp.)
• If the film jams frequently.
• After 100 film rolls have been processed.
• If the blade is not cutting the film properly or is making a
very rough cut.
Turn power OFF, unplug power cord, then wait 10 minutes for the machine to cool down.
Open display cover with slotted or Phillips screwdriver.
Unlock black screw. Slide the red bladeholder to the filltube (2), not possible to move the
bladeholder further, please rotate the blade (3 and 4). When the blade is dull on both sides,
please renew the blade.
1
FP International
i
nstructions
b / c
lAdes one tip
2
RISK OF BURN
Before opening covers, turn power OFF, unplug power
cord, and wait 10 minutes for seal wheel to cool.
4
pro pak'r User Manual Version 1.0
3
page -23-