Starting Up The Machine - Fp International Pro Pak’r Original Bedienungsanleitung

3 o
perAting
NO TAG
3.2 s
tArting up the mAchine
• Make sure the machine has been set up correctly.
• The machine can be fixed on a stand (optional) or can be placed on a stable table.
• Insert provided power cord into the rear of the machine.
• Plug the power cord into a dedicated, grounded outlet.
• Switch on the machine with the main switch. The start-up screen will appear on the
display.
FP International
i
nstructions
Shows the machine is ready to use
Shows the machine is running.
Shows the menu for switching to a operate mode
Shows that the machine is on manual mode
Shows that the machine is in foot pedal mode.
Shows that the machine is on bin / sensor mode
Shows that the machine is in Auto-Index mode .
Shows that the machine is in ADS mode.
Shows the restore. Press the restore button below the icon to access
Press Start. This may clear the error. If not, turn the roll.
GB: Always remove the roll of film before
changing the
position of the stand.
DE : Entfernen Sie immer zuerst die Folie
bevor Sie die Position des Standes änderen.
FR: Retirer impérativement la bobine de film
avant de changer la position du stand.
NL: Verwijder altijd eerst de folie alvorens de
positie van de stand te veranderen.
pro pak'r User Manual Version 1.0 page -17-