Herunterladen Inhalt Inhalt Diese Seite drucken

Kitchen Timer And Duration/Delay - Klugmann KO610TCBL Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

OPERATION
Timer. Kitchen Timer. Duration. Delay
start.
Touch
to use KITCHEN TIMER, DURA-
TION and DELAY START features. Touch the
sensor repeatedly until the desired function
symbol is flashing. Then use setting selec-
tion knob to set the time.
The available functions are displayed as fol-
lows: kitchen timer -> duration -> end time
(you can set it after duration is entered).
DELAY START function is activated when you
set DURATION and then END TIME.
DURATION and END TIME determine when
the appliance turns on and off. KITCHEN
TIMER does not affect oven operation.

KITCHEN TIMER and DURATION/DELAY

START functions can be used at the same
time.
Clear timer settings.
Touch and hold
settings.
Additional timer display.
Additional timer display located in the bottom
right corner of the display has functions, de-
and
to clear all timer
pending on the oven operating mode (when
DURATION and DELAY START functions
are active).
1. Duration. When active, the
is displayed. Additional timer display shows
the time that has elapsed since the oven was
turned on. The time indication is cleared when
you set function selector knob to 0.
2. Additional timer display shows the start
time when DELAY START function is active.
The
symbol is off and start time is shown.
3. Additional timer display shows the re-
maining time when DURATION and DELAY
START functions are active. The
is off. Additional timer display shows the re-
maining time. For DELAY START function,
when start time is reached, additional timer
display will show the remaining cooking time.
Kitchen Timer
The Kitchen Timer counts the time down.
When the countdown is completed [timer
alarm] is heard. The KITCHEN TIMER oper-
ates independently from other functions.
Set the KITCHEN TIMER.
Touch
and you will hear a [confirmation]
beep. The
kitchen timer symbol start flash-
ing and the main time displays shows flashing
00:00 until you use setting selection knob to
set the time. Turn setting selection knob left/
right to set the time. Touch
timer countdown, you will hear a [confirma-
tion] beep. If you set the time (other than
00:00) but you do not touch
after 5 seconds you will hear the [confirma-
tion] beep and KITCHEN TIMER countdown
will start. When KITCHEN TIMER countdown
starts the main time display shows current
time and kitchen timer symbol is shown.
22
symbol
symbol
to start kitchen
to confirm,

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis