Philips BT3237 Bedienungsanleitung Seite 9

General
Introduction
Charging
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Charge the appliance fully before you use it for the
first time and after a long period of disuse.
It takes approximately 10 hours (BT3205 BT3206
BT3211) or 1 hour (BT3212 BT3215 BT3216 BT3221
BT3226 BT3227 BT3236 BT3237) to fully charge the
appliance.
When it is fully charged, the appliance has a
cordless operating time of up to 45 minutes
(BT3205), 60 minutes (BT3211 BT3212 BT3215
BT3216 BT3226 BT3236) or 90 minutes (BT3221
BT3227 BT3237).
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance.
3 Put the supply unit in the wall socket.
4 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
9
English