ASROCK 939Dual-SATA2 Bedienungsanleitung Seite 10

This yellow-colored Future CPU Port is not an AGP slot! Please do
NOT insert any AGP card into it!
CPU Type
939-Pin CPU
(Default)
940-Pin (M2)
CPU
(Using add-on
ASRock M2CPU
Board)
NOTE
When adjusting the jumper settings, you may use the tool, Jumper Cap Remover, to help you
removing the jumper caps more easily. This Jumper Cap Remover is bundled in your motherboard
package, and please follow the "Jumper Cap Remover Instruction" to use it properly.
PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
PCIE Slots: PCIE1 (PCIE x 16 slot) is used for PCI Express cards with x16 lane
width graphics cards.
PCIE2 (PCIE x 1 slot) is used for PCI Express cards, such as
Gigabit LAN card, SATA2 card, etc.
AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has
a special design of clasp that can securely fasten the inserted graphics
card.
Please do NOT use a 3.3V AGP card on the AGP slot of this
motherboard! It may cause permanent damage! For the voltage infor-
mation of your AGP card, please check with the AGP card vendors.
1 0 1 0 1 0
1 0 1 0
ASRock 939Dual-SATA2 Motherboard
Jumper Settings
J3 J4
J1 J2
J10
J9
J11
J3 J4
J1 J2
J10
J9
J11
J7 J8
J5 J6
J7 J8
J5 J6