Adjusting The Height Of The Calibration Board; With Ruler Mounting (Optional); Reading Out The Height - Bosch EL–52425 Originalbetriebsanleitung

5.8 Adjusting the height of the calibrati-
on board
5.8.1

with ruler mounting (optional)

Robert Bosch GmbH
5.8.2

Reading out the height

1
1. Lower the ruler to the floor.
2. The height displayed on the ruler has an offset of
400 mm with respect to the pattern on the calibrati-
on board.
Operation | EL–52425 | 25
400 mm
|
1 690 386 081
en en
2018-02-22