Werbung
Adjust the support leg up to the shortest, to
hang. Make sure that the support leg shows a
red indicator. Step 2: First pull out the diagonal
belt.
NOTE: Make sure that the diagonal seatbelt
section runs over your child's shoulder bone, and
not in front of his or her neck.
Step3: Lock the tip of the buckle into the vehicle
seat buckle with a CLICK noise. Follow the
direction of arrow to tighten belt, and put
redundant belt into cloth cove. Shake the child
safety car seat to make sure it is securely
attached
CAUTION! The diagonal seat belt section must
run diagonally backward.
Installed in Rearward Facing Position with ISOFIX
connector and Support Leg; Group 0 I(0-18KG)
Put the ISOFIX device into the two ISOFIX attachment points of your vehicle.
If you don't have the ISOFIX device, ignore this step!
NOTE: The ISOFIX attachment points are located between the surface and the
backrest of the vehicle seat.
Pull the locking arm to and fro until you
hear an audible CLICK which indicates they
are fully engaged. And on both sides of the
locking arms' button turn into green safety
colour.
Pull out the support leg, adjust it to the
maximum angle.
Adjust the length of the support leg so that
it is in full contact with the ground of the
vehicle(Display window turns into green
colour).
Installed in Rearward Facing Position with ISOFIX
connector and Support Leg; Group I(9-18KG)
Press the ISOFIX button to pull out the two
locking arms from the base bottom. Pull the
locking arm to and fro until you hear an
audible CLICK which indicates they are fully
engaged. And on both sides of the locking
arms' button turn into green safety colour.
25
Pull out the support leg, adjust it to
the maximum angle.
Adjust the length of the support leg
so that it is in full contact with the
ground of the vehicle (Display
window turns into green colour).
WARRANTY
The warranty period starts from the date of purchase and is valid for period of 24
months. The warranty is only applicable to material and production defects. The
date of purchase can only be proven with the original sale receipt.
This warranty is only applicable to the original owner and is not transferable. The
warranty is only applicable to products that have not been adapted by the user.
In the case of any defects, the owner is required to return the product to the
retailer.
CARE AND MAINTENANCE
Periodically inspect your child seat for worn or damaged parts. If damaged parts
are found, replace the child seat. Keep the child seat clean. Do no lubricate any
parts of the child seat. To prolong the life of your nursery product, keep it clean
and do not leave it in direct sunlight for extended periods of time. Removable
fabric covers and trims may be cleaned using warm water with a household soap
or a mild detergent. Allow it to dry fully, preferably away from direct sunlight.
CLEANING THE BUCKLE
Food, drinks or other debris may collect inside the harness buckle which can
affect proper functioning. Wash in warm water until it is clean . Be sure that you
can hear an audible click to make sure the buckle is working properly.
CLEANING THE HARNESS AND SHELL
Sponge clean using warm water and mild soap; do not use any other cleaning
agents.
STORAGE
Store in a safe, dry place and away from heat and direct sunlight. Avoid placing
heavy objects on top of the seat.
MAIN TECHNICAL PARAMETERS
Length: 510mm
Width: 436mm
Height: 640-840mm
MADE FOR CANGAROO
Importer: Moni Trade Ltd
Address: Stopanski dvor – Trebich,
Sofia, Bulgaria
Phone: +3592/ 936 07 90; +3592/ 838 04 59
26
Werbung
