Technical Parameters - LUND 67120 Originalanleitung

case of excessive contamination, replace the fi lter with a new one.
Clean the remaining parts of the vacuum cleaner with a cloth slightly soaked in water, then dry or allow to dry.
To clean the turbo brush shaft, disconnect the brush from the pipe or the vacuum cleaner, then slide the roller lock (XV) located
on the underside of the brush, dismantle the roller, clean it and reinstall it in the brush in the order reverse to that of disassembly.
The vacuum cleaner can be stored in the docking station. If the charger plug has been inserted into the docking station, make sure
that the charger is not connected to the power supply while the vacuum cleaner is in storage. The accessories can be connected
or disconnected from the vacuum cleaner for storage.

TECHNICAL PARAMETERS

Parameter
Catalogue No.
Rated voltage
Rated power
Electrical protection class
Dust container capacity
Weight
Battery
- type
- capacity
- rated voltage
Charger
- rated supply voltage
- rated frequency
- rated power
- rated output voltage
- rated output current
- electrical protection class
O R I G I N A L
14
GB
Units
[VDC]
[W]
[l]
[kg]
[Ah]
[VDC]
[V~]
[Hz]
[W]
[VDC]
[mA]
I N S T R U C T I O N S
Value
67120
22.2
120
II
1
0.8
Li-ion
2.2
22.2
100 - 240
50/60
24
27
500
II