Standard Accessories; Optional Accessories - EMAK PW 300 HC Bedienungsanleitung

• The packing materials must be disposed of according to current regulations in the country where the water cleaner is
installed.
In particular, plastic bags and packaging must never be abandoned, as they are harmful to the environment.
• After removing the appliance from the packing materials, check that no parts are missing.
In case of doubt, do not use the water cleaner but contact an authorised service centre so that a Skilled Technician
can check the appliance.
3.1 I
dentIfICatIon
See Fig. 1 at the front of these operating and maintenance instructions.
The identification label (12) contains the serial number and the main technical specifications of the water cleaner.
The warning labels (10 ; 13) inform you of any other risks, such as: do not use the high pressure cleaner unless
you have read the instructions manual; do not use the high pressure cleaner for washing people, animals, electrical
equipment or the high-pressure cleaner itself.
Warning plate (29): informs about a burning danger that is due to the contact with hot parts that are to be found
near the plate itself.
WARNING
• After removing the appliance from the packing materials, check that the identification label and the warning labels
are present and are legible. If this is not the case, contact your dealer or an authorised service centre so they can be
replaced.
• If the identification label and the warning labels deteriorate during use, contact your dealer or an authorised service
centre so they can be replaced.
3.2 s a
tandard
Make sure that in the product package that was bought there are the following elements:
• high-pressure water cleaner;
• hose reel complete with high-pressure delivery pipe;
• water gun;
• lance hose;
• accessory bag containing:
- nozzle
- nozzle cleaning pin,
- water suction connector
- water suction filter/gasket;
- use and maintenance manual;
In case of problems, apply to the dealer or to an authorised service centre.
3.3 o a
ptIonal
WARNING
• The operation of the water cleaner may be impaired if unsuitable accessories are used and they may even make it
dangerous. Only use original accessories endorsed by the Manufacturer.
Refer to the documents provided with the optional accessories for information regarding their general use, safety warnings,
installation and maintenance.
• Some accessories have a maximum operating temperature that is lower that the maximum one that can be reached by
the water cleaner: with these accessories it is therefore necessary to limit the temperature, by operating on knob (27) in
the due way.
It is possible to build in the standard equipment of the water cleaner with a rich range of accessories.
To buy them, apply to the dealer or to an authorised service centre.
3.3.1 Optional accessories with max. operating temperature lower than 90 °C/194 °F
• Pipe draining probe: maximum operating temperature 60 °C/140 °F.
• Rotating nozzle lance hose: maximum operating temperature 60 °C/140 °F (there is also a professional
version with maximum operating temperature of 100 °C/212 °F).
• Floor-washing lance: maximum operating temperature 60 °C/140 °F.
• Rotating water jet brush: maximum operating temperature 60 °C/140 °F.
18
l W
abel and arnInG
CCessorIes
CCessorIes
l
abels