Standard Accessories; Optional Accessories - EMAK PW 120C Bedienungsanleitung

• After removing the appliance from the packing materials, check that no parts are missing.
In case of doubt, do not use the water cleaner but contact an authorised service centre so that a Skilled
Technician can check the appliance.
3.1 I L
DENTIFICATION
See Fig. 1 at the front of these operating and maintenance instructions.
The identifi cation label (7) contains the serial number and the main technical specifi cations of the water
cleaner.
The warning labels (5) inform you of any other risks, such as: do not use the high pressure cleaner unless you
have read the instructions manual; do not use the high pressure cleaner for washing people, animals, electrical
equipment or the high-pressure cleaner itself.
WARNING
• After removing the appliance from the packing materials, check that the identifi cation label and the warning
labels are present and are legible. If this is not the case, contact your dealer or an authorised service centre
so they can be replaced.
• If the identifi cation label and the warning labels deteriorate during use, contact your dealer or an authorised
service centre so they can be replaced.
3.2 S A
TANDARD CCESSORIES
Make sure that in the product package that was bought there are the following elements:
• high-pressure water cleaner (PW 120C - PW 135C - IP 1200S - IP 1350S - PW 145C - IP 1450S);
• high-pressure delivery pipe with fast coupling;
• water brush (PW 135C - IP 1350S - PW 145C - IP 1450S only);
• lance hose complete with nozzle support head (PW 120C - IP 1200S only);
• lance hose (PW 135C - IP 1350S - PW 145C - IP 1450S only);
• rotating nozzle head (PW 135C - IP 1350S - PW 145C - IP 1450S only);
• nozzle support head (PW 135C - IP 1350S - PW 145C - IP 1450S only)
• foaming lance;
• use and maintenance manual;
• nozzle cleaning pin;
• handlebar;
• 2 screws to secure handle,
In case of problems, apply to the dealer or to an authorised service centre.
3.3 O A
PTIONAL CCESSORIES
The standard accessories for the high pressure cleaner can be integrated with the following vast range of
accessories:
• Sandblasting lance: designed for smoothing down surfaces, eliminating rust, paint, deposits etc.
• Pipe-draining probe: designed for unblocking pipes and ducts.
• Rotating water jet brush: designed for cleaning delicate surfaces.
• fl oor cleaning lance.
WARNING
• The operation of the water cleaner may be impaired if unsuitable accessories are used and they may even
make it dangerous. Only use original accessories endorsed by the Manufacturer.
Refer to the documents provided with the optional accessories for information regarding their general use,
safety warnings, installation and maintenance.
W L
ABEL AND ARNING ABELS
GB
21