Concept VO2870 Bedienungsanleitung Seite 43

EN
1. If the day time is displayed, press the CLOCK/BFA button. The display will switch to the mode according to Fig. 8. The
position of height setting in cm will be blinking.
2. Use the buttons ▼ and ▲ to select the height in cm and confirm by ENTER.
3. Use the buttons ▼ and ▲ for the selection of physical activity AL 1-5 of the person being weighed (further see Table
4) and confirm by ENTER.
4. Use the buttons ▼ and ▲ to select age 10-99 years and confirm by ENTER.
5. Use the buttons ▼ and ▲ to select gender and confirm by ENTER.
6. Use the buttons ▼ and ▲ to select normal or athletic mode (see the information below) and confirm by ENTER. A
sound signal will be heard and measuring readiness indicator (R) will be displayed. You can now step on the weighing
surface or store the set data in the memory of the unit.
7. If you want to store the data in the unit's memory, use the buttons and to select the required memory number (Fig.
9) and push the ENTER button. Occupied memory is indicated by the symbol „ -„.
8. A sound signal will be heard and the memory storage indicator (M) and measuring readiness indicator (R) will be
displayed.
9. You can start to measure the body fat, water, muscle and bone mass.
Fig. 7 Fig. 8
BODY FAT, WATER, MUSCLE AND BONE MASS MEASURING FUNCTION
1. When the unit is switched off, briefly push one of the buttons ▼ or ▲.
2. The memory number and entered personal data will be displayed.
3. Use the buttons ▼ and ▲ to select the required memory number and confirm by ENTER.
A sound signal will be heard and measuring readiness symbol (R) will be displayed. Step
on the weighing surface barefoot; place your feet on the measuring electrodes (Fig. 6).
Make sure not to slide, or turn the unit over. The measured weight will appear on the
display (Fig. 7).
4. After a while the measurement of body fat and water will be displayed (Fig. 10). To make
sure the measurement is correct, make sure your feet, calves and thighs do not touch.
5. After measuring, the value of body fat will be displayed (Fig. 11), together with the value
of water content in body weight percentage (Fig. 12), measured body weight, the bone
mass and muscle mass (Fig. 13), actual calculated income of calories (PC) per one day
(Fig. 14) and ideal optimum income of calories (IC) in one day (Fig. 15).
6. After 3 displaying cycles of the resulting values, the unit will switch automatically to the
time display.
Fig. 11
VO2870
Fig. 9
Fig. 12 Fig. 13
Fig. 10
Fig. 14 Fig. 15
41