Backlight - Santec VTC-HDH359IRPU/G Bedienungsanleitung

Bedienungsanleitung / User Manual
VTC-HDH359IRPU/G / VTC-HDH359IRPU/W

3.4 Backlight

Move the joystick up/down to select „Backlight".
Move the joystick left/right to make adjustments.

BLC (Backlight Compensation):
 If the object is exposed to strong backlight, you can activate the „backlight" function in
order to achieve a clear picture of both the object itself and the background.
o Area sel.:
o Area state:
o Height/width: Define the hight/width of the area.
o Left/right:
o Top/bottom: Top/bottom position of the area.

HLC (Hightlight Compensation):
HLC enables to remove extremely bright light spots in the picture (e.g. caused by a
car's light) which increases the sharpness oft he picture.
You may define whether this function is enabled "all day" or on "night only".
Note:
HLC is only active if there are extremely bright spots in the picture during darkness.
At daylight, the HLC function is disabled.
_________________________________________________________________________________
Select the area where backlight occurs.
Activate or deactiviate the area.
Left/right position of the area.
- 39 -