Making The Electrical Connection - Tecsis P3427 Betriebsanleitung

6. Commissioning, operation
Sealing of the process connection
Parallel threads
GB
per EN 837
Correct sealing of the process connections with
parallel threads at the sealing face
made using suitable flat gaskets, sealing rings or
tecsis profile sealings.

6.2 Making the electrical connection

■
The pressure sensor must be earthed via the process connection.
■
Use the pressure sensor with shielded cable.
■
Cables, connectors and terminating resistors which are used in a CAN network must
comply with the requirements of ISO 11898-2.
36

per DIN 3852-E

must be
Tapered threads

For sealing process connections with tapered
threads, the sealing must be made in the threads
using additional sealing material, e.g. PTFE tape
(EN 837-2).
Operating instructions pressure sensor P3427
NPT, R and PT