Connecting The Power; Changing The Outlet Plug - Tascam 8p Dyna SERIE Bedienungsanleitung

Connecting the power

Use the included AC adapter (PS-P1230) to connect a power
supply to the unit as shown below.
In order to prevent the cord from becoming disconnected
during use, wrap it around the cord holder when connecting it.
ATTENTION
Always use the AC adapter (PS-P1230) that was shipped
with the unit. Using a different AC adapter could cause
malfunction, overheating, fire or other problems.
NOTE
The AC adapter for the unit includes 3 types of outlet plugs.
Attach the type of plug that matches the power outlet that
you are using. (see "Changing the outlet plug" on page 10)
10
TASCAM SERIES 8p Dyna
Power outlet
PS-P1230 (included)
DC plug

Changing the outlet plug

NOTE
When purchased new, the included PS-P1230 AC adapter for
the unit has an outlet plug (A) already attached.
Follow the procedures below to attach and use a different
outlet plug (B - D) if necessary.
1.
Fold the outlet plug (A) on the PS-P1230 AC adapter in the
direction of the arrow.
2.
Select the plug that matches the AC outlet from the 3 other
types included (B, C or D).
3.
Attach the outlet plug to the AC adapter.
This completes changing the outlet plug.
After changing the outlet plug, confirm that it is not loose or
crooked and that everything is normal before plugging it into an
outlet.
ATTENTION
Do not use the adapter if there is anything abnormal about
the plug after changing it. Use when the plug is abnormal
could cause fire or electric shock. Contact the retailer where
you purchased the unit or a TASCAM customer support
service to request repair.