Canon imageRUNNER 1133 Bedienungsanleitung Seite 19

Using the ID Card
Use your ID card to log in when the screen shown in step 1 is displayed.
IMPORTANT
Logging-in by using the ID card is available only when the optional MiCard Reader is
attached to the machine.
1
Hold your card over
the reader until you
hear a beep. Press the
ID Key to log out
after the operation.
Select Cost Center
Canon
Group 1
<Log In>
<To Sub Cost Center>
2
When your operations are complete, hold your ID card over the
MiCard Reader until the log-in screen shown in step 1 appears.
You can also log out of the machine by pressing [
Hold your ID card over the
MiCard Reader until the display
switches to the next log-in step
or the standby display.
❑
If a screen prompting you to select a cost
center appears, select the appropriate
cost center using [ ] or [ ].
• Select a cost center in the lower or
upper level by using <To Sub Cost
Center> or <To Parent Cost Center>.
• You can search for cost centers by
using <Search>.
• You can select a cost center from the
history by using <Display History>.
For more information on these search
options, see the note on p. EN-10.
❑
Select <Log In> using [ ] or [ ] and
press [OK].
The standby display appears.
] (Log In/Out).
Logging in to the Machine
EN-12