Environmental Concerns - Electrolux ENA34633W Benutzerinformation

26 electrolux
6.
Remove using a tool the cover (b1).
Unscrew the lower hinge pivot (b2) and
the spacer (b3) and place them on the
opposite side.
7. Re-insert the lower door on the lower
hinge pivot (b2).
8. Insert the middle hinge (m2) into the left
drill of the lower door.
9.
C1
C3
2
1
Remove using a tool the cover. (c1).
10. Unscrew the upper hinge pivot (c2) and
place it on the opposite side.

ENVIRONMENTAL CONCERNS

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
b1
b2
b3
C2
1
2
C4
11. Re-screw the upper hinge.
12. Fit the upper door on the upper door
pivot.
13. Re-insert the upper door on the middle
hinge pivot (c3 )slightly tilting both
doors.
14. Re-screw the middle hinge. Do not for-
get the plastic spacer.
H1
H2
.
15. Unscrew the handles (h2) and fix them
on the opposite side.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the re-
versibility of the doors at your cost.
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be