Additional Components; Remote Temperature Sensor - Renogy ROVER PG Serie Installation Und Handbuch

Common Positive Grounding
The Rover PG is a positive ground controller. In a positive ground controller all positive terminals
are bonded together and charge/load control switching is done in the negative leg of the circuit.
When using positive ground controller in a positive ground system, the positive terminals can be
grounded at various points in the system.
In a negative ground system, the positive ground controller can also be used if the system
grounding is proper. This means there should only be one grounding point in the negative
ground system, either on the panel, battery or load. For example, if the battery negative is
grounded, do not ground the negative side of the solar panel or load. Having multiple ground
points will disable the controller's ability to controll PV charging or load operation, and can lead
to system failures.
Do not ground a positive ground controller when added to a negative ground system. Negative
ground systems can be found in cabins, RVs and boats.
Additional components included in the package:
EN

Additional Components

Remote Temperature Sensor:

This sensor measures the temperature at the battery and uses this
data for very accurate temperature compensation. Accurate
temperature compensation is important in ensuring proper battery
charging regardless of the temperature.
Do Not use this sensor when charging lithium battery.
NOTE
Mounting Brackets
These brackets can be used to mount the Rover charge
controller on any flat surface. The screws to mount the
brackets to the charge controller are included, screws to
mount charge controller to surface are not included.
08