Devon Tread 1 Gebrauchsanweisung Seite 23

B e lt s m i s a l i g n e d
• Numbers are not centered in their respective
windows in the Indicator Plate?
Though rare, at times the sensors will incorrectly
detect the position of the belts. When this
occurs the effected belts will not be centered
in their respective windows on the indicator
plate. The problem can usually be corrected by
turning the watch off and then on again.
• What are the ambient lighting conditions?
If the watch continues to misalign it may be the
case that the ambient lighting conditions are
affecting the sensors. This often happens in
sunlight or fluorescent lighting. Move to a dimly
lit room or shade the watch with you hand and
turn the watch off and then on again.
• Is there a Rollover Misalignment?
Rollover Misalignment occurs when a belt has
lost synchronization with the microcontroller.
The watch will not turnover when it should.
For example the minutes will advance when
the seconds passes a number other than "00".
This issue is similar to the other alignment
issues and can usually be resolved by turning
the watch off and then back on.
If problems persist the watch will need to be returned
for adjustment.