SOLIS Mulinetto Plus 1610 Bedienungsanleitung Seite 38

▲
I M P O R TA N T S A F E T Y P R E C A U T I O N S
Please read through this user manual thoroughly before
using your Solis Mulinetto Pro so that you become familiar
with your appliance and can use it safely. We thoroughly
recommend that you keep these instructions and, if you
pass the appliance on, that you also hand these instructions
to the new owner.
For your own safety, please observe the following safety
measures when using elec trical appliances:
1. To avoid electric shock, neither the appliance base nor the
power cord and plug must come into contact with water or
any other liquids. Water can enter the housing and damage
the appliance! Should the appliance base resp. the power
cord or plug come into contact with liquids, use dry rubber
gloves to immediately pull the power plug from the power
socket.
2. The milling container itself must be completely dry on the
inside, outside and bottom before being placed in the appli-
ance base. The same applies to the blade.
3. Do not operate or unplug the appliance with wet or moist
hands or feet.
4. Before using the appliance, check that the voltage stated on
the type plate matches your mains voltage.
5. Place the appliance while in function on a level, stable, clean
and dry surface, like a table or work top.
6. Do not leave the power cable hanging over table edges so
that it can be pulled. Make sure that it does not come into
contact with hot surfaces, such as hotplates or a radiator or
with the appliance itself.
7. Keep the appliance away from hot gas, hot ovens and other
heat-emitting appliances or heat sources. Never use the appli-
ance on a hot or wet surface. Never place the appliance near
38