TCS ECOOS Bedienungsanleitung Seite 18

EN
CONFIGURABLE FUNCTIONS
The following functions can be configured at your
video indoor station and for the use of further in-
door stations. For configurations please contact
your qualified electrician.
Switching lights, internal call, call diversion and door release automa-
tic can be used only alternatively.
Call indoor stations (internal call)*
To call another indoor station, shortly press the
function key
An acknowledgement tone sounds, if the call has
reached its call destination.
When the call is accepted at the called device, a
voice communication is established.
Call diversion
The incoming call is diverted to a second indoor
station. Shortly press the function key
activate the call diversion. The red LED
Shortly press the function key
activate the call diversion.
A call cannot be diverted to all TCS indoor stations. The diverting indo-
or station is not signalling the diverted call.
Open the floor door
If the floor push-button at the floor door is pres-
sed, the floor door can be opended with the blue
door release button (instead of the front-door) wi-
thin 30 seconds.
18
Service Fon. +49 4194 9881-188 | Fax +49 4194 9881-188 | E-Mail hotline@tcsag.de
.
again to de-
Door release automatic
An incoming door call directly effects the opening
of the door if this function is activated.
Shortly press the function key
the door release automatic. The red LED
Shortly press the function key
activate the door release automatic.
Switch lights with the door release button
if no voice connection is established
Parallel call
A second indoor station sounds together with the
first one in case of an incoming door, floor or in-
ternal call. The ring tone sounds at both indoor
stations.
to
blinks.
to activate
blinks.
again to de-