Display Settings - TCS ECOOS Bedienungsanleitung

EN
SETTING THE VIDEO IMAGE
The display
The video image is displayed immediately after
pressing the image button
ving a door call.
Optional, the speech button can be pressed in order to receive tones
in addition to the video image when in stand-by mode (speaking and
video off).
The symbols in the video image are displayed au-
tomatically.
If the speech button was pressed, the fade-in of
the symbols is finished after 3 seconds.
image of the camera or video
front-door station no. 05
image buffer activated
ring tone mute
call diversion activated or
door release automatic activated
14
Service Fon. +49 4194 9881-188 | Fax +49 4194 9881-188 | E-Mail hotline@tcsag.de

Display settings

The setting of contrast, brightness, color intensity
or after recei- and conversation
volume is realised quickly and easily in the symbol
menu of the display when in stand-by mode (spe-
aking and video off). The conversation volume can
only be adjusted during a voice connection.
1. Shortly press the image button
image of the video front-door station is displayed.
2. Shortly press the menu button
menu for settings is displayed.
3. Shortly press the menu button
switch over to the next parameter.
4. Shortly press the navigation button UP
DOWN
change is visible immediately in the video image.
5. The menu is switched off automatically after 10
seconds, if no button is pressed.
Or: Shortly press the function key
off the menu.
contrast
brightness
, to change the parameter value. The
color saturation
conversation volume
adjustable only during the
communication
. The
. The
again to
or
, to switch