Specifications - Fujitsu fi-412PR Bedienungshandbuch

6. Specifications

Item
Printing Method
Print Timing
Printing Characters
Maximum number of
characters per line
Print orientation
Character size
Character pitch
Document that can be
scanned
Printing area
Dimension
Weight
Ambient condition
Consumable
Thermal inkjet printing
Post printing
: A to Z, a to z
Alphabet
Numeric Characters : 0, 1 to9
: ! " $ # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _` { | } ~
Symbols
Maximum 40 characters
0º, 180º (horizontal orientation), 90º, 270º (vertical orientation)
Height 2.91mm × width 2.82mm (horizontal orientation),
Height 2.82mm × width 2.91mm (vertical orientation)
3.53mm
Documents supported by fi-4120C2
For the details, please refer to "fi-4120C2 Image Scanner Operator's Guide"-"Chapter 6
Document Specification for the ADF."
Documents with glossy surface such as thermal paper, thermal transfer paper, coated paper,
ATTENTION
and art paper take longer time for the ink to dry and may cause poor print quality. The imprinter
must be cleaned more frequently if you use these types of papers.
D
Printing Area
(Back side)
C
A
Without Scanner : 300(W) × 241(D) × 146(H) mm / 11.81(W) x 9.49(D) x 5.75(H) inches
With Scanner : 303(W) × 437(D) × 277(H) mm / 11.93(W) x 17.2(D) x 10.91(H) inches
2.5kg (5.51 lbs)
Temperature: 10 to 35ºC (50 to 95 degrees ºF), Humidity: 20 to 80%
Print Cartridge (P/N: CA00050-0262)
Replacement Cycle : 4,000,000 characters
(
The number of characters may decrease depending on the font selection.)
Specification
A=5mm
B=5mm
C=5mm
D=5mm
(0.20inches)
ATTENTION
B
fi-412PR Imprinter Operator's Guide | 17
Do not print less than 5mm of
the page margins.