Location And Function Of Parts And Controls; Front Panel - Sony KLH-W26 Bedienungsanleitung

Location and Function of Parts and Controls

Front Panel

MENU
1 MENU (page 16)
/ (INPUT)
2
• In the menu screen, this button works as the "Set"
button.
• This button works to switch the input signal when it
is not in the menu screen.
Selects an input signal from among the HD15/
HDMI 1/HDMI 2/OPTION connectors.
When an optional adaptor is not installed in the
OPTION slot, OPTION will be skipped.
/
3
In the menu screen, these buttons work as left/right
/
buttons ( ).
/ /
4
• Increases (+) or decreases (–) the volume.
• In the menu screen, these buttons work as up/down
buttons ( / ).
5 1
Switches the display on/off (standby).
Note
To protect the panel, a certain amount of time is
required to turn the display to on/off (standby). When
you turn the display on again, soon after turning it off,
wait about 5 seconds before you turn it on again.
6 PIC OFF/TIMER indicator
• Lights up in green when "Picture Off" function of
"ECO Mode" is selected.
• Lights up in orange when "Sleep Timer" function is
activated.
7 STANDBY indicator
Lights up in red when the display is in standby mode.
8 POWER indicator
Lights up in green when the display is switched on.
Remote control sensor
9
GB
7
GB