Sony KLH-W26 Bedienungsanleitung Seite 55

For PC Input
: : :
Wide Mode
Auto Adjustment
Phase
Pitch
Horizontal Shift
Vertical Shift
Reset
Notes
• "Auto Wide", "4:3 Default", "Display Area" and "Vertical Size" are not available for PC input.
• When the input is digital signal via HDMI 1/HDMI 2, "Auto Adjustment", "Phase" and "Pitch" are not available for PC input.
• If there is no signal currently being input, none of the "Screen" settings options can be selected.
:
"Normal": Select to display the picture in its original size.
"Full 1": Select to enlarge the picture to fill the display area in the vertical direction
while keeping its original aspect ratio. A black frame will appear on the surrounding
of the picture.
"Full 2": Select to enlarge the picture to fill the display area.
Select to automatically adjust the display position and phase of the picture when the
display receives an input signal from the connected PC.
Note that "Auto Adjustment" may not work well with certain input signals. In such
cases, manually adjust the options below.
Select to adjust the phase when the screen flickers.
Select to adjust the pitch when the picture has unwanted vertical stripes.
Allows you to move the position of the picture left and right in the window. Press
B/b and press
to choose a correction.
Allows you to move the position of the picture up and down in the window. Press
V/v and press
to choose a correction.
Resets the following settings; "Phase", "Pitch", "Horizontal Shift" and "Vertical
Shift" to the default settings.
When input is switched to PC input source, the
"Screen" settings specific for PC input are applied.
The PC "Screen" settings include the following
options:
GB
23
GB