Introduction; Precautions - Sony KLH-W26 Bedienungsanleitung

Introduction

Precautions

On safety
• A nameplate indicating operating voltage, power
consumption, etc. is located on the rear of the unit.
• Should any solid object or liquid fall into the cabinet,
unplug the unit and have it checked by qualified personnel
before operating it any further.
• Unplug the unit from the wall outlet if it is not to be used
for several days or more.
• To disconnect the AC power cord, pull it out by grasping
the plug. Never pull the cord itself.
• When you install the unit on the floor, be sure to use the
optional display stand.
On installation
• Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may block
the ventilation holes.
• Do not install the unit in a location near heat sources such
as radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
• When you install multiple equipment with the unit, the
following problems, such as malfunction of the remote
control, noisy picture, noisy sound, may occur depending
on the position of the unit and other equipment.
On the LCD panel
• You may see some bright spots of red, blue or green, or
dark spots appearing on the screen. These do not indicate
a malfunction. Although the LCD panel is manufactured
with extremely high precision technology, it can generate
a few dark or bright pixels.
• Keeping the LCD panel facing toward the sun for a long
time will damage the panel. Take this into account when
you install the unit outdoor or by a window.
• Do not push, scratch or put a heavy weight on the panel.
These can cause irregularities in the screen or a
malfunction of the LCD panel.
• You may find the screen looks darker or an afterimage
occurs when using the unit in a colder environment. These
do not indicate a malfunction. The screen will return to
normal operation as the temperature rises.
• If you display a still image continuously, a ghosting may
occur. This symptom will be gradually resolved by
changing the image or making the whole screen display in
white. In addition, if you display the same still image for
a long period of time, the ghosting may not be resolved.
• The panel surface or the cabinet may warm up during use.
This does not indicate a malfunction.
4
GB
On cleaning the display
The panel surface
• Be sure to unplug the power cord before cleaning the
display.
• The LCD panel surface has been given a special finish.
Avoid touching the LCD screen. When cleaning the panel
face, wipe off stains using a dry, soft cloth.
• Never use rubbing alcohol, benzine or thinner for
cleaning. They may damage the finish of the panel face.
• When using a chemically treated cloth for cleaning, follow
the directions.
• Spraying the unit with volatile solvents (such as an
insecticide) or allowing the unit come into prolonged
contact with rubber or plastic products may remove the
coating or spoil the unit.
The cabinet
• Gently wipe off stains using a dry, soft cloth. Wipe off
grimy stains using a cloth slightly moistened with a mild
detergent, then wipe the area again using a dry, soft cloth.
• Never use rubbing alcohol, benzine or thinner for
cleaning. They may damage the finish of the cabinet or
can remove the markings on it.
Notes on handling and cleaning the display panel
The display panel's special surface finish should be
treated with care when cleaning or handling the
display. When cleaning it, use a soft cleaning cloth to
avoid touching the panel directly.
On repacking
Do not throw away the carton and packing materials.
They make an ideal container in which to transport the
unit. When shipping the unit, repack it as illustrated on
the carton.
If you have any questions on this unit, contact your
authorized Sony dealers.