Motorola NNTN6899 Bedienungsanleitung Seite 13

Mounting hardware
(Not included)
3. Pull out the locking plates at the two sides to align with
the charger's base screw holes.
4. Assemble two pieces of M4 screws (included in the
package through the locking plates into the charger
base as shown in the picture below. Do not overtighten
the screws.
Mounting holes
Note: The Charger Base Tray
can also be mounted with the
Locking
Plates
M4 Screw
(Included)
11
Wall Mount Bracket
Wall Mount Bracket
(NNTN6844).