Handling A Staple Jam - Kyocera DF-780 Einführung

6. Close the staple cover.

Handling a staple jam

If a paper jam happens to occur during
stapling, a staple may have jammed. In this
case, perform the following procedure.
3. Re-install the staple cartridge holder.
The staple cartridge holder will click into
place when it has been inserted correctly.
1. Remove the staple cartridge holder using
the same procedure as in "Replenishing
staples". Then, open the cover plate (A) of
the staple cartridge holder and remove
any jammed staples.
4. Close the staple cover.
2. Close the cover (A) plate of the staple
cartridge holder into its original position.
9