Data Preset - 969.Coffee 969-64 On DEMAND Handbuch

Press the K1(-) key to switch to programming of the language of the text shown on the LCD screen. For example, this
appears on the screen:
Press the KPROG key to select another language. The second line of text starts blinking:
Press the K1(-) or K2(+) key to scroll through the available languages: Italian, French, German, English and Spanish.
Once you have selected a language, press the KPROG key to save it in the memory. The new language appears on the screen,
for example:
If you enter TECHNICIAN programming mode and do not press any of the keys within 60 consecutive seconds, the system
automatically exits the programming mode.
You can, whenever, press the KON/OFF key to exit programming mode before the 60 seconds have elapsed.

DATA PRESET

The PRESET function is for setting the timers configured in USER mode and the language set in TECHNICIAN mode back to their
factory (default) values.
To perform the PRESET function, turn on the system at the main switch while pressing and holding both the K1(-) and the K2(+)
keys. This appears on the screen:
Turn the system off and then on again at the main switch to restore correct use of the machine.
PRESET (default) DATA:
Duration of grinding for dose 1 (single): 2.5 seconds
Duration of grinding for dose 2 (double): 4.0 seconds
Language used: ITALIAN
Please note: the PRESET function does not reset either the TOTAL or the PARTIAL counters of doses 1 and 2.
18