969.Coffee 969-64 On DEMAND Handbuch Seite 16

Press the KPROG key to enable editing of the grinding time for dose 1 (single dose). The second line of text on the screen starts
blinking:
Press the K1(-) key to decrease the set value, or the K2(+) key to increase it. Press and hold the K1(-) or K2(+) keys to decrease
or increase the value more quickly. Once you have set the required value, press the KPROG key to save it in the memory. The
new value is shown on the screen (no longer blinking). For example:
Press the K1(-) or K2(+) key to select the menu for editing dose 2 (double dose). This appears on the screen:
Press the KPROG key to enable editing of the grinding time for dose 2 (double dose). The second line of text on the screen
starts blinking.
Press the K1(-) key to decrease the set value, or the K2(+) key to increase it. Press and hold the K1(-) or K2(+) keys to decrease
or increase the value more quickly. Once you have set the required value, press the KPROG key to save it in the memory. The
new value is shown on the screen (no longer blinking). For example:
Ra ge of p og a a le alues fo oth si gle dose a d dou le dose :
min: 0 seconds max: 50 seconds step: 0, 1 seconds
Please note: setti g the alue at disa les the g i di g le fo the elati e dose.
If you enter USER programming mode and do not press any of the keys within 60 consecutive seconds, the system
automatically exits the programming mode.
You can, however, press the KON/OFF key to exit programming mode before the 60 seconds have elapsed.
16