Technical Data - 969.Coffee 969-64 On DEMAND Handbuch

not be disposed of.
Before plugging in the appliance make sure that its technical features are suitable for the electrical systems it is going to be
used on. If the socket and the plug (if fitted) are not compatible please have the socket replaced with a suitable one, making
sure that the diameter of the cord is suitable to the appliances power absorption . In case of cord replacement it is
compulsory to use a H07RN-F compliant cord.
Make sure that the power supply matches the one the appliance has been designed for and that the existing wiring can bear
the absorption of the newly-installed appliance, as well as of the existing devices. After installing a circuit-breaker with fuses,
connect the cord wires of the appliance to the circuit breaker in accordance to the related schematics.
The Manufacturer advise against using adaptors, multiple sockets and cord extensions. If necessary, use simple or multiple
adaptors only and extensions in compliance to the safety laws and regulations, making sure not to exceed power loads,
indicated on simple adaptors or cord extensions, and maximum load indicated on multiple adaptors.
The electrical safety of this appliance is guaranteed only if it is properly connected to an earth socket, as per the most up to
date electrical safety laws and regulations.
Please have this relevant safety feature carefully checked and, in case of doubt, please have qualified personnel check the
existing power wiring.
The Manufacturer shall not be considered as responsible for any damages occurring when the appliance is not properly
earthed.
To avoid dangerous overheating, we recommend fully unwinding the power cord. The user must not replace the power cord.
If the cord is damaged, or to have it replaced, address an authorized Dealer.
Make sure the appliance is unplugged when not in use. Open the circuit breaker the appliance is connected to, when not in
use.
Do not close or block vents or heat dispersion slits. Keep the appliance away from wall and other objects.
ENVIRONMENTAL CONDITIONS FOR AN APPRPORIATE APPLIANCE USE
Room temperature: 05 – 45 °C
For a correct functioning please carefully follow the instructions provided, having qualified personnel perform a regular
operations and safety check. Do not use the device without coffee. Do not leave the appliance where temperature goes below
zero.

TECHNICAL DATA

Model
"uppl
F e ue
Po e o su ptio
Moto po e
Moto RPM
Bu s dia ete
Hoppe apa it
Maximum humidity: 80% relative humidity
V si gle phase
9 9 -
/ Hz
A
W
.
.
, kg.
9 9 -
V si gle phase
/ Hz
, A
W
.
, kg.
13