Assigning Preset 1-3 - Canton Smart Soundbar 10 Kurzanleitung

If the connection has failed, you receive the message [FAI].
7
If the (mobile) device requires a code, enter 0000.
8
If [DIS] appears on the display, your (mobile) device is out of range or logged
9
off.
Note:
• If you have assigned a name to the Soundbar 10 during network setup
(e.g. living room), this name is also displayed here.

ASSIGNING PRESET 1-3

The Soundbar 10 is able to assign presets to three memory keys. All settings in the
speaker and system menu (volume, sound settings, selected input, etc.), as well as
playlists from the app „Spotify" are saved. The memory buttons can be operated
via the Smart remote control as well as via the keypad on top of the Soundbar 10.
Saving inputs and sound settings
In addition to saving playlists from the app „Spotify" (see next page), you can
1
also assign the desired inputs and the selected sound settings to the memory
buttons 1, 2 or 3. For example: Go to the HDMI 1 input and set the volume
level and/or other sound settings to the desired value. To save this input setup
and the specified sound settings, press and hold the memory button 1, 2 or 3 on
the Smart-remote or on the keypad of the Soundbar 10 until the corresponding
number is shown in the LED display and no longer flashes.
To recall the saved input selection and sound settings, briefly press the corre-
2
sponding button 1, 2 or 3. The input and the corresponding sound settings will
then be recalled.
English
3 3 9