Assigning Preset 1-3 - Canton Smart Soundbar 9 Kurzanleitung

English
To exit the menu, press the menu (M) button on the Smart-remote until the
10
previously selected input (e.g. NET) is displayed, or wait 30 seconds without pressing
any button.

ASSIGNING PRESET 1-3

The Soundbar 9 is able to assign presets to three memory buttons (1, 2, 3) on the
Smart-remote. All settings in the speaker and system menu (volume, sound settings,
selected input, etc.), as well as playlists from the app „Spotify" can be saved.
Saving inputs and sound settings
In addition to saving playlists from the app „Spotify" (see next page), you can
1
also assign the desired inputs and the selected sound settings to the memory
buttons 1, 2 or 3 on the Smart-remote. For example: Go to the HDMI 1 input
and set the volume level and/or other sound settings to the desired value. To
save this input setup and the specified sound settings, press and hold the me-
mory button 1, 2 or 3 on the Smart-remote until the corresponding number is
shown in the LED display and no longer flashes.
To recall the saved input selection and sound settings, briefly press the corre-
2
sponding button 1, 2 or 3. The input and the corresponding sound settings will
then be recalled.
Notes:
• When assigning the 3 memory buttons, you can assign different settings to all
3 memory buttons. Examples:
Memory button 1 = HDMI input 1 & sound setting
Memory button 2 = Favorite Playlist in the app „Spotify" & sound setting
Memory button 3 = HDMI input 2 & sound setting
• When assigning the memory buttons, all settings available at the time of saving
on Soundbar 9 (e.g. sound settings, volume, etc.) will be saved.
36