Blaupunkt CV 250 Bedienungsanleitung Seite 13

1. Make sure your equipment is switched on. If not switch it on manually
2. Press and hold S until the LED indicator lights steadily. Release S
3. Press the mode key that matches the equipment you want to control (for example TV).
4. Press Channel + repeatedly until the channel changes. If you step past the correct code use
Channel - to go back to the right code
5. When the equipment you want to control reacts press ENT to confirm the code . Thats all
Note : If your equipment doesnt have Channel + you can use PLAY (VCR) or the POWER
The search starts after the last registered code. If that was 030, the search starts at at 031 until
the last possible code and then goes from 000 to 029.
Note : if certain functions of your equipment can't be controlled you have to find a different
code for your brand
Indentifying codes found using the search procedure
1. Press and hold S until the LED indicator lights steadily . Release S
2. Press the mode key for the equipment you want to identify (TV, VCR ,SAT ). The LED blinks
once.
3. Press again S. The LED blinks once.
4. To identify the first digit press each number button from 0 – 9 until the LED blinks. The
number you pressed is the first digit of the code.
5. Press each number key from 0 – 9 as above to find the second digit.
6. Press each number key from 0 – 9 as above to find the third digit. When the third digit has
been found the LED will go off. Don't forget to write down the code on the label of the
battery compartment.
Controlling your house with the help of home automation modules from X10
The 4 in 1 remote allows you to command all electric appliances you have in your house. In
addition to transmitting infrared signals, which control your TV, VCR and SAT your remote is
equipped with a radio transmitter sending X10 signals , which will enable you to control from a
distance lamps and electric appliances.
Here are some examples that you can do with your 4 in 1 remote to using X10:
• Switch on/off , dim lights while you watch TV.
• Start your coffee machine from your room when you wake up
• Switch on the lights at night to frighten intruders when you detect something suspicious
• Switch on your electric blanket before the film ends to have it warm when you go to sleep
For controlling your lamps and appliances you will need additional X10 home modules. The
modules are simply plugged into a/c outlet with no additional wiring required. Contact your
retailer for additional information.