General Points - Blaupunkt CV 250 Bedienungsanleitung

Universal Remote CV250 4 in1
Contents
Introduction
Put in the batteries
Programming the remote control
Programming for the TV, VCR and Satellite
Looking for the code
Verifying the code of your equipment
Controlling your home with X10
Troubleshooting
Introduction
The CV250 is designed to control up to 3 devices (TV, VCR and Satellite). It is also possible to
control electrical equipment, such as lamps and appliances, in association with X10 modules.
The CV250 contains a library of codes which are pre-programmed into the remote control. This
library covers nearly all the audio video products on the market today.
To make it easy for you to find the right code for your audio video equipment, we advise to use
the AUTOSEARCH feature.
Put in the batteries (always use NEW alkaline batteries LR03)
1. Open the cover on the back of the CV250.
2. Insert two AAA batteries - LR03 alkaline, verify that they are placed correctly with the + on
the battery in the same position as marked inside the battery compartment.

General Points

The RF transmission: It is parallel to the IR signal. This allows you to combine the commands
of your TV , VCR ... and with the use of the Power Mid it works through walls and floors.
The double function : it allows you to control the volume and the « mute » button of your TV
even when you are in VCR or SAT mode.