Problems And Troubleshooting - Blaupunkt CV 250 Bedienungsanleitung

Control of X10 home modules
1. Press and release
2. Use the digital key to select the number of the selected module (0 does not function) – LED
blinks for every number.
3. Press the key corresponding to your desired action (see below). The LED blinks once.
X10 functions :
ON :
Off :
Brighten lights (Brt) :
Dim lights (Dim) :
All Lights On :
All Off :
Changing the X10 House Code
The preset house code is A and in the majority of cases it is not necessary to change this setting
except if there is interference from neighbouring X10 systems. In that case :
Press and release
1-
Press and hold S until the LED lights continuously
2-
Use the digit keys to enter the number equivalent to the choosen home code (1=A, 2=B, ...
3-
16=P).
Press the ENT to confirm your command. The LED turns off
4-
Note : The code you have choosen has to be the same as the one selected on the Transceiver
module TM12 or the security console, with which you use your remote.

Problems and troubleshooting

The remote doesn't work or looses codes entered
· Confirm with your original remote that the equipment works correct
· Make sure that you have pressed the corresponding mode key of the equipment or device that
you want to control.
, the LED blinks once.
, the LED blinks once.
Key to use
Channel +
Channel -
Volume +
Volume -
Power
Mute