Blaupunkt CV 250 Bedienungsanleitung Seite 11

Programming your remote – functions of the keys
[1] LED indicator :
The indicator light flashes when the remote is operating or lights continuously while you
are programming the remote.
[2] S (programming and secondary functions) : This allows you to programm your
remote before the first use . Because of the limited numbers of keys available , certain
minor functions (bright, colour) maybe set default (TV, VCR, SAT ). It is most likely that
you can access these functions (called secondary) through the S key. If a function is
missing press the mode button for the device you want to control, then press the S key
and try to find the function by pressing different keys.
[3] Backlight key (option)
[4] ENT :
If you are in programming mode – automatic code search- you can confirm the of the
device you want to control. In connection with the numeric keys this key allows you with
some older equipment to select directly channels higher than 9.
[5] Info :
Works the same way as the INFO on your original remote by showing the channel
information on the screen .
[6] Volume :
Controls the volume in TV , VCR & SAT mode
[7] Teletext MIX : Allows to mix the Teletext and the picture of the selected channel.
[8] Teletext Hold : Holds the Teletext mode
[9] REC (record ):
This key works the same way as the one on your original remote for your VCR. In order
to avoid a mistake you have to press this key twice to activate this feature.
[10] Teletext Start: starts the Teletext mode
[11] VCR button Play , FF , Stop, Rew , Pause :
(in VCR mode )
These buttons work directly for the majority of the available brands and work the same
way as in your original remotes
(in TV mode)
Fast text functions if the TV is on Teletext mode. Specific functions according to brand.