Check The Supplied Accessories; Operation; First Use Of The Epg Cut 40 Power Tool; Precautions When Using The Battery And Charger - Weidmuller EPG CUT 40 Originalbetriebsanleitung

2.5

Check the supplied accessories:

Hard-top case, equipped
Battery EPG - 1,5Ah (Type: Li-Ion battery 18V)
Battery charger with country­specific plug (Type: C Li 18)
USB 2.0 cable with A-male plug and 5-pole mini B-male plug
CD-ROM
I
3.

Operation

3.1

First use of the EPG CUT 40 Power Tool

Insert the supplied battery (Type: Li-Ion battery 18V) into the guidances of the battery foot of the
power tool EPG CUT 40 until the securing slides click in place.
3.2

Precautions when using the battery and charger

The charger (Type: C Li 18) is designed for 120 V or 230 V AC 50-60 Hz, depending on the
version (see the voltage rating on the charger nameplate). The batteries are supplied partially
charged and need to be charged before use. To charge the battery, connect the charger to a wall
outlet and plug the battery into the charger.
1
2516420000 /00/04.2017
II
78-100 %
55-77 %
33-54 %
10-32 %
< 10 %
2 3
III
4
RED
GREEN
100%
[ I ]
[ II ]
[ III ]
[ IV ]
[ V ]
IV
RED
65°C
0°C
GREEN
100 %
RED/GREEN
RED
65°C
0°C
V
29