Safety Instructions For Installing, Commissioning And Maintenance; Guarantee Conditions - Elmo Rietschle C-DLR 401 Originalbetriebsanleitung

2.8

Safety instructions for installing, commissioning and maintenance

2.9

Guarantee conditions

Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
• The operator will ensure that any installation,
commissioning and maintenance work is car-
ried out by authorised, qualifi ed specialists who
have gained suffi cient information by an in-depth
study of the operating instructions.
• Only work on the machine when it is idle and
cannot be switched on again
• Ensure that you follow the procedure for decom-
missioning the machine described in the operat-
ing instructions.
• Fit or start up safety and protective devices
again immediately after fi nishing work.
• Conversion work or modifi cations to the ma-
chine are only permissible with the manufactur-
er's consent.
• Only use original parts or parts approved by the
manufacturer. The use of other parts may invali-
date liability for any consequences arising.
• Keep unauthorised people away from the ma-
chine
The manufacturer's guarantee or warranty will no
longer apply in the following cases:
• Improper use
• Not complying with these instructions
• Operation by insuffi ciently qualifi ed staff
• Using spare parts that have not been approved
by Gardner Denver Schopfheim GmbH
• Unauthorised modifi cations to the machine or
the accessories supplied by Gardner Denver
Schopfheim GmbH
www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
Tel. 071 918 60 60, Mail: v-g@prematic.ch
Safety
9
|