Gima 27600 Betriebsanleitung-Montageanweisungen Seite 6

6
ENGLISH
PRODUCTS
27600 bed with 1 articulation
27601 bed with 1 articulation with wheels
27610 bed with 3 articulation
27611 bed with 3 articulation with wheels
27605 standard bed -no castors
27606 standard bed - Ø 50 mm castors
27607 standard plus bed -no castors
27608 standard bed - Ø 100 mm castors
ATTENTION
! The operators must carefully read and completely understand the present
manual before using the product.
In accord to Directive 2007/47/EC, this product is part of the CLASS I MEDICAL DEVICES.
DESCRIPTION
The orthopedic bed is intended for use in hospital, community, nursing homes in order to
help the patient in small daily needs during hospitalization.
The structure is composed of a painted steel welded mesh that supports the mattress,
divided into two sections for the version with 1 crank (27600/27601) or through an automatic
rack (27607/27608); divided into three sections for the versions with 2 cranks (27610/27611).
The headboard and footboard's structures is produced in chromium-plated tubular steel with
MDF panels and equipped with legs (with or without wheels). The crank and the control lever
are chromium-plated, with a plastic handle.
The standard beds (27605/27606) are simple beds with or without wheels, totally in epoxy
powder-coated steel, including headboard and footboard, with a rigid mesh mattress
platform. Optional items: Collapsible supports, Lifting pole for ill people.
COMPONENTS:
(1) Headboard (with panels or tubular steel)
(2) Footboard (with panels or tubular steel)
(3) Bed Base: Welded mesh with 1 or 2 cranks included (27600/27601/27610/27611), bed
base with adjustable backrest (27607/27608), rigid mesh mattress platform (27605/27606).
Assembly material:
- N.4 5X20 SCREWS
- N.4 M5 BOLTS
ASSEMBLY INSTRUCTIONS:
The bed is supplied partially assembled. The headboard and footboard are supplied already
assembled, complete with frame, panel or crossbars and wheels, if the model requires it. It is
necessary to fi x the frame/net to the headboard and footboard.
Begin the assembly phase by setting up a stable horizontal work plan.
The mounting method is the same for all the models in this manual although the net,
headboard and footboard are different.