Compass FREEZE Handbuch Seite 4

E
4. FAQ
The appliance is out of working:
ź
-Check the power supply connection
-Whether the plug and the socket have a good connection.
-Whether the fuse has been burned out.
-Whether the appliance has been turned on
-Whether the compressor is in delay start protection when the appliance is starting up.
The food inside is frozen:
ź
-The setting temperature is too low.
Hear the sound of water from the inside place.
ź
-It is normal, due to the flow of refrigerant.
Display F1 code
ź
-Low power protection, setting the protection from H3 (H) to H2 (M) or H1 (L）
Display F2 code
ź
-Fan overload protection, turn off the unit and restart the unit after 30 minutes. If the F2 is still dis-
played, please contact the after-sales person.
Display F3 code
ź
-The compressor protection is activated. Please turn off the unit and restart the unit after 30 minute-
s. If the F3 is still displayed, please contact the after-sales person.
Display F5 code
ź
-Compressor controller module protection is activated. Please turn off the unit, keep it at ventilated
place and restart the unit after 30 minutes. If the F5 code is still displayed, please contact the after-
sales person.
Display F7/F8 code
ź
-Temperature sensor error. Please restart the unit. If the F7/F8 code is still displayed, please con-
tact the after-sales person.
4