Installation Rules; Maintenance - Vimar TAB 7559 Kurzanleitung

TAB: 7559
The instructions manual can be downloaded from
the website www.vimar.com

Installation rules

Installation must be carried out by qualified persons in
compliance with the current regulations regarding the
installation of electrical equipment in the country where the
products are installed.
Regulatory compliance
EMC directive
Standards EN 60065, EN 61000-6-1, EN 61000-6-3 and
EN 60118-4.
REACH (EU) Regulation no. 1907/2006 – Art.33. The
product may contain traces of lead.
WEEE - User information
The crossed bin symbol on the appliance or on its
packaging indicates that the product at the end of its
life must be collected separately from other waste.
The user must therefore hand the equipment at the end of
its life cycle over to the appropriate municipal centres for the
differentiated collection of electrical and electronic waste.
As an alternative to independent management, you can
deliver the equipment you want to dispose of free of charge
to the distributor when purchasing a new appliance of an
equivalent type. You can also deliver electronic products
to be disposed of that are smaller than 25 cm for free, with
no obligation to purchase, to electronics distributors with a
sales area of at least 400 m
for subsequent recycling, processing and environmentally
conscious disposal of the old equipment helps to prevent
any possible negative impact on the environment and
human health while promoting the practice of reusing and/
or recycling materials used in manufacture.
Description
Wall-mount Tab series hands-free video entryphone for Due
Fili Plus system with 4.3" LCD colour display, loudspeaker for
calls, capacitive keypad for entryphone functions (unlocking,
self-starting, auxiliary services, volume, brightness and
contrast controls) and intercom calls.
Desktop installation is possible with the desktop base
accessory 753A (sold separately).
Can be used by wearers of hearing aids.
. Proper sorted waste collection
2
Technical characteristics
• Wall-mounted, with metal bracket, in box: circular 2M
(Vimar V71701), 3M (Vimar V71303, V71703) vertical
and square British standard.
• LCD 4.3" 16:9 display, resolution 480x272 pixels
• Minimum video signal level on the bus for reception: -20
dBm
• Capacitive touch keypad with backlit symbols.
• Powered from BUS terminals 1, 2 - nominal voltage
28Vdc
• Power consumption:
- in standby: 17 mA
- maximum current: 280 mA
• Ambient class: Class A1 (indoor use)
• IP30 protection rating
• Operating temperature: -5°C to +40°C (indoor use)
• Electronic ringer with 10 different melodies.
• Input for landing call.
• Dimensions: 155 x 145 x 23.5 mm
• DIP switch for line termination impedance.
Audio frequency function for hearing aids
(Teleloop)
The video entryphone can be used by people wearing hearing
aids.
For correct functioning of the hearing aid, please refer to its
instruction manual. Any metal objects or electronic equipment
in the vicinity may affect the quality of the sound received by
the hearing aid.

Maintenance

Clean using a soft cloth. Do not pour water onto the appliance
and do not use any type of chemical product.
Cleaning must be carried out either with the apparatus
powered off (= disconnected from the bus) or after activating
the keypad cleaning procedure (see the relative paragraph in
the user manual).
Warnings for the user
Do not open or tamper with the appliance.
In the event of faults, contact specialized personnel.
EN
7