Candy COMBI Bedienungsanleitung Seite 39

this function.
To deactivate Fast Freezing: Click "option" until it goes to "fast freezing" and then click "OK" to quit
this function.
VACATION: In case of long stops, the Vacation function can be used. This function deactivates the
fridge compartment, while leaving the freezer on. Ensure that there is no food inside the fridge
compartment before using this function. The function is activated and confirmed by the switching
on of the dedicated LED icon. The light in Vacation goes off and the refrigerator temperature goes
back to the value before Vacation.
Vacation quits under functions of Smart ECO and Fast Cooling.
To enter Vacation: Click "option" until it flickers in "Fast Freezing" and then click "OK" to enter this
function.
To deactivate Vacation: Click "option" until it goes to "Vacation" and then click "OK" to quit this
function.
POWER OFF MEMORY: Refrigerator can automatically keep all the setting in case of power off.
When the unit is plugged in again, the refrigerator will run with the setting before power off.
POWER-ON DELAY: To prevent harm to the refrigerator in case of sudden power cut and power on,
the unit does not start immediately if the power off time is less than 5 minutes.
FREEZER OVER-TEMPERATURE ALARM (only in case of power on): When the freezer temperature is
higher than 10°Cat the first time connected to power, the symbol light of the freezer chamber
goes on and the number representing temperature flickers.
Press any button or wait for 5 seconds, flickering stops and it goes back to the temperature that was
set.
REFRIGERATOR DOOR OPENING ALARM: When the refrigerator is open over 3 minutes, the buzzer
will buzz. Close the door or press any button to stop the alarm, but for the latter, the alarm will go
off again after 3 minutes.
SENSOR FAULT ALARM: When it shows "E0", "E1", "E2" or other abnormal symbols, it means sensor
faults and the refrigerator needs repair.
39