Sz-Stl2 - Optika Italy SZ Serie Bedienungsanleitung

8.11.2 SZ-STL2

Moving the horizontal arm
1. Unlock the knob on the left side of the horizontal
arm ①. (Fig. 56)
2. The arm can be extended or shortened according
to specific needs. (Fig. 57)
Tilting the head holder
1. Loosen the knob ② (Fig. 58) on the right side
of the head holder. The tilting vertical arm can
be moved. Once the desired angle is achieved,
tighten the knob again.
Swivel the head
1. Unlock the fixing knob ③ and rotate the head to
the desired swivel angle (left or right), then tighten
the knob again. (Fig. 59 - 60)
①
Page 33
②
③
F ig. 56 F ig. 56
F ig. 57 F ig. 57
F ig. 58 F ig. 58
F ig. 59 F ig. 59