Description Of The Components - Klauke EK425 Bedienungsanleitung

Instruction Manual EK425
_______________________________________________________________________________________________________________________
4. Description of the battery operated electro-hydraulic crimping tool

4.1 Description of the components

The hydraulic tool type EK425 is a hand held tool and consists of the following components:
Table 1 (see picture 2)
Pos.-# Description
1 Trigger
2 Retract slide
3 Pressing head Working unit to accommodate the pressing jaws
4 Locking pin
5 Battery
6 Battery lock
7 Jaws
8 Lock
9 LED
10 Key ring
Function
Actuator to start the crimping cycle
Bar to open the crimping jaws in case of an error or
emergency
Pin with special lock to open/close the pressing head P 26
rechargeable NiMH battery 9.6V 2 Ah
Slide to unlock the battery
insulated interchangeable pressing jaw CJD3 which
also accommodates W-dies
to hold the interchangeable dies in place
Battery charge control and indication of Service
Intervals
Device to secure the tool
page 24
see page
pp 25, 26, 27
P 27
P 31
pp 27, 32-
33, 35
P 32
pp 25, 26,
28-29, 31,
34
P 3
P 26
-