Plc Configuration Of The Cl03 Valve System - Aventics PROFINET VS serie Betriebsanleitung

70 AVENTICS | PROFINET | R412023897–BDL–001–AA
Commissioning and Operation
7.2

PLC configuration of the CL03 valve system

For the bus coupler to exchange data from the modular valve
system with the PLC, the PLC must be able to detect the valve
system structure. In order to represent the actual configuration
of the valve system's electrical components in the PLC, you can
use the configuration software of the PLC programming system.
This process is known as PLC configuration.
Configuration error!
An incorrect valve system configuration can cause
malfunctions in and damage to the overall system.
O
The configuration may therefore only be carried out by
qualified personnel (see section "Personnel
qualifications" on page 53).
O
Observe the specifications of the system owner as well
as any restrictions resulting from the overall system.
O
Observe the documentation of your configuration
program.
You may configure the valve system on your computer
without the need to connect the unit. The data can be
transferred to the system at a later time on site.
Configuration error
An incorrectly configured bus coupler will lead to
malfunctions in the system, which may lead to damage to the
system.
O
The configuration may only be carried out by qualified
electronics personnel.
NOTICE
NOTICE