Herunterladen Inhalt Inhalt Diese Seite drucken

Subnetmask; Input Select - Sony BDX-D1000 Bedienungsanleitung

Mpeg decoder unit
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Setting on the OPTION CONTROL menu
You may use the OPTION CONTROL menu for future
options.
OPTION CONTROL
DEMUX PID
Settings and indications on the INPUT
STATUS menu
You may specify the input signal and synchronization
mode on the INPUT STATUS menu.
INPUT STATUS

INPUT SELECT

REF. LOCK
STREAM INPUT
REF. VIDEO
INPUT SELECT: Sets the input stream. Select
from among IF, ASI, PARALLEL and SDDI.
REF. LOCK: Sets the synchronization mode.
Press the ENTER button after setting.
AUTO: When a reference video signal is
supplied, a video signal in synchronization with
that sync signal is output.
When no reference video signal is supplied, the
input video signal is output as-is.
INTERNAL: Regardless of the presence of a
reference video signal, the input video signal is
output as-is.
STREAM INPUT: Existence of a stream signal
input (EXIST or NONE) (For display only. No
setting can be made.)
REF. VIDEO: Existence of a reference video signal
input (EXIST or NONE) (For display only. No
setting can be made.)
0x0300
ASI
AUTO
EXIST
EXIST
Settings and indications on the SYSTEM
INFO. menu
The SYSTEM INFO. menu shows the hardware
information of this unit.
You may set the IP addresses on this menu.
SYSTEM INFO.
MODEL NAME
SERIAL NO.
SOFT VER.
IP ADDRESS
192.
1.
IP ADDRESS (GATEWAY)
O.
O.

SUBNETMASK

255.255.255.
MODEL NAME: Model name of this unit (BDX-
D1000) (for display only)
SERIAL NO.: Serial number of this unit (for
display only)
SOFT VER.: Software version number of this unit
(for display only)
IP ADDRESS: IP address of this unit.
IP ADDRESS (GATEWAY): IP address of the
gateway assigned by the network administrator
when controlling this unit via a network.
Set to (0.0.0.0) if the gateway is not used.
SUBNETMASK: Subnet mask assigned by the
network administrator when controlling this unit
via a network.
For IP ADDRESS, IP ADDRESS (GATEWAY), and
SUBNETMASK, press the ENTER button for
registration after setting. These settings become
effective when power is next reapplied.
BDX-D1000
10001
1.00
2.
4
O.
O
O
13 (E)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis