Technical Data; Gas Nailer; Permissible Nails And Gas Cartridges; Troubleshooting - DeWalt Trak-It C5 DDF5110500 Originalanleitung

6

Technical Data

6.1 Gas Nailer

DDF5110500
Height 365 mm
Width 124 mm
Depth 435 mm
Weight including
battery and gas
cartridge
Magazine
42 nails
capacity
Impact energy
Battery
Type Nickel-hydrogen battery
Art.No.
Charger 100 - 240 VAC, 50/60 Hz
Art. No.
Output
Charging 2.5 hours (with battery fully
time
Sound power
level*
Emission sound
pressure level*
Vibrations*
*Values can vary: The work environment,
workpiece support, workpiece, contact pressing
force and so forth affect the noise development
at the place of operation and the effects of
vibrations on the object.
6.2 Permissible Nails and Gas
Cartridges
Length
Diameter 2.6 mm, 3.0 mm, 3.7 mm
Nail head
Type of nail
head
D
Art.No.
DDF5120550
365 mm
124 mm
334 mm
3.7 kg 3.6 kg
22 nails
105 J
6 VDC, 1.5 Ah
DDF5610500
DDF5610520
8 VDC, 1.5 Ah
empty)
L = 1 s, d 107.0 dB
WA
L = 1 s, d 99.3 dB
pA
LpC = 131.5 dB
peak
K = 3 dB
18.5 m/s², K = 1.6 m/s²
Nails
15 to 40 mm
6.4 mm
Flat head, round head
WALT Gas Cartridges
E
DDF5140500
7

Troubleshooting

Barrel is pressed against surface, but
engine is not running:
Cause(s)
Barrel not pressed
¿ rmly enough against
the surface
The Gas Nailer has
not been operated for
longer than 24 hours
Electronics faults
Battery is empty
Battery overheated
Gas Nailer overheated
Gas Nailer has to be
serviced
Bent barrel
Gas Nailer defective
Barrel is pressed against the surface, but
motor stops after 5 seconds:
Cause(s)
Normal function
Barrel is ¿ rmly pressed against the surface,
the motor is running, but the nails are not
¿ red when the trigger is pressed:
Cause(s)
Gas cartridge empty or
not ¿ lled to a suf¿ cient
degree
Stuck/jammed nails
English
Measure(s)
Press the barrel harder
against the surface
See chapter 2.3, "Sleep
Mode"
Remove the battery
and insert it again after
30 seconds
Charge the battery if the
LED on the handgrip is
À ashing, see chapter
2.4 "LED Device
Indicator"
Let the battery cool
down
Let the Gas Nailer cool
down
Let the Gas Nailer be
serviced if the LED on
the handgrip is À ashing,
see chapter 2.4 "LED
Device Indicator"
Have the Gas Nailer
be repaired by an
authorized dealer
Measure(s)
No measures
Measure(s)
See chapter 3.2, "Insert
Gas Cartridge"
See chapter 4.3,
Removing stuck Nails"
47